Metal roof tiles
Installation guide for roof safety systems on pitched roofs covered with metal roof tiles.
The Eurovent® roof safety system is a set of proven components installed on the slope of a pitched roof. It enables safe movement on the roof in accordance with the EN 516 standard. The system consists of the Eurovent® PLATFORM roof walkway, Eurovent® STEP roof step, Eurovent® GRIP cradles, and Eurovent® SUPPORT METAL brackets, which together allow the creation of functional and durable roof access paths on pitched roofs covered with metal roof tiles.
The system provides safe and convenient access to chimneys, roof hatches, technical installations and equipment requiring inspection or maintenance, while also improving working comfort on the roof for roofers, chimney sweeps and service technicians, in compliance with building regulations.
Download the installation guide to your phone:
Download the installation instructions
Installation guide for the following models
What should you know before installing the Eurovent® roof access system?
Ensure that the structural battens beneath the roof covering are correctly positioned. The roof access system brackets must be mounted directly to the structural battens after the roof covering has been installed.
Before installing the brackets, make sure that the roof covering has been properly installed. When installing the roof access system, use only the hot-dip galvanized screws and mounting components supplied with the set, and, if necessary, apply roofing sealants to ensure proper sealing.
What does a roof access system consist of?
Eurovent® PLATFORM SET – The set consists of the Eurovent® PLATFORM roof walkway, two Eurovent® GRIP cradles, and two Eurovent® SUPPORT METAL brackets.
Eurovent® STEP SET – The set consists of two Eurovent® STEP roof steps, one Eurovent® STEP element, and two Eurovent® SUPPORT METAL brackets.
These components allow the creation of functional and durable roof access paths on pitched roofs covered with metal roof tiles.
Installation of the Eurovent® SUPPORT roof access bracket
Roof covering: Metal roof tiles
1. After installing the roof covering, determine the location for the bracket installation. Drill two holes with a diameter smaller than the mounting screws at the bracket installation point.
2. Seal the drilled mounting holes with a roofing sealant.
3. Position the first bracket at the installation point.
4. Fix the bracket using galvanized hex-head wood screws Ø8 or galvanized wood screws min. Ø6 × 40 mm. Repeat the steps when installing additional Eurovent® SUPPORT brackets.
Eurovent® STEP roof step installation
Roof covering: Metal roof tiles
1. Prepare the Eurovent® STEP roof step and position it on the Eurovent® SUPPORT bracket.
2. Secure the roof step to the Eurovent® SUPPORT bracket using the supplied 2 × M8 bolts, 2 washers and 2 nuts, as shown in the diagram.
Eurovent® PLATFORM roof walkway installation
Roof covering: Metal roof tiles
1. Installation of the roof walkway requires at least 2 Eurovent® SUPPORT brackets.
2. Prepare the Eurovent® GRIP walkway holder for installation and position it on the Eurovent® SUPPORT brackets already fixed to the roof covering.
3. Secure the Eurovent® GRIP walkway holder (cradle) to the Eurovent® SUPPORT bracket using the supplied 2 × M8 bolts, 2 washers and 2 nuts, as shown in the diagram.
4. Prepare the Eurovent® PLATFORM roof walkway for installation and position it on the Eurovent® SUPPORT brackets equipped with the Eurovent® GRIP holders.
Eurovent® LINK roof walkway connector installation
Roof covering: Metal roof tiles
Eurovent® PLATFORM SET roof walkway systems can be connected to each other to create a continuous roof access path.
The connection is made using two Eurovent® LINK connectors installed between the Eurovent® PLATFORM roof walkways. Note: A Eurovent® SUPPORT bracket must be installed at the connection point.
Maintenance of the Eurovent® roof access system – how to properly care for roof walkways and roof steps
Guidelines for cleaning, inspections and maintenance of a roof access system compliant with EN 516.
The Eurovent® roof access system, including the PLATFORM roof walkways, STEP roof steps, and SUPPORT brackets, requires regular maintenance to ensure proper functionality, safe use and long-term durability of the system. Regardless of the type of roof covering (including metal roof tiles), inspections should be carried out at least once a year.
What does the annual maintenance of the roof access system include?
1. Cleaning the system components
- Remove accumulated debris from the walkways and steps, such as leaves and branches, dust and atmospheric deposits, as well as bird nests and droppings.
- For cleaning, use mild cleaning agents, such as neutral or slightly alkaline detergents commonly used for maintenance.
- Do not use pressure washers, as they may damage the protective coating or weaken the mounting connections.
2. Technical inspection of mounting components
- Check the rigidity and stability of the connections between the individual components of the system.
- Inspect all bolts and nuts and tighten them if any looseness is detected.
- If signs of corrosion are found, clean the affected area and restore the protective coating using recommended anti-corrosion products.
3. Inspection of the roof covering in the installation area
- Check whether any leaks or damage have occurred around the mounting points of the Eurovent® SUPPORT brackets on the roof surface.
- If necessary, apply an appropriate roofing sealant.
Why is maintenance of the roof access system important?
Regular maintenance of the Eurovent® roof access system is not only the responsibility of the user, but above all an investment in the safety and durability of the roof structure. Well-designed roof walkways and steps require only simple maintenance procedures to ensure comfortable and safe access to critical areas of the roof for many years.
Extends the service life of metal components installed on the roof. Reduces the risk of corrosion and mechanical weakening of the system. Ensures full compliance with the EN 516 standard for roof access safety. Guarantees that roof walkways and steps continue to perform their function, providing safe access to chimneys, PV panels, roof hatches and antennas.
Final information
The information, recommendations and guidelines provided are based on our current best knowledge, research, experience and good faith. We do not accept responsibility for the consequences of improper or incorrect use of our products. Each user of this material should verify, by all possible means — including testing the final product under appropriate conditions — the suitability of the supplied materials for achieving their intended purpose.
All installation works, maintenance and technical inspections should be carried out exclusively by authorised, qualified and experienced personnel.
